Simple step-by-step instructions
Signup   Login  
 
  1. Write
  2. Directory
  3. Home

How to Get Gun Powder out of a Bullet
590 views, 0 comments

This page will show you how to get gun powder out of a bullet. There are many ways that this can be done, but this article will focus on using an inertia Kenetic bullet puller
Instructions

Things you'll need:

  • A bullet (WARNING: NO RIMFIRE!!)
  • An Kenetic bullet puller. There are many different brands. Ezypul, RCBS, "home brands" . $40 - $60 at your local retailer or online shop
1
Remove the cap.

2
Select the collet matching the rim size of the cartridges.

3
Place the cartridge, projectile facing foward, through the rounded end of the collet until the rim of cartridge prevents further forward movement.

4
Insert the cartridge and collet, projectile first into the body of the puller.

5
Screw on the cap and tighten firmly by hand.

6
Strike the ezypul tool onto a firm surface with head of the tool and thus the cartridge moving at right angles to the striking surface. A hard wooden block is the ideal surface.

7
Re-tighten the cap after each strike.

8
After removing the cap and cartridge case from the tool, the projectile, power and case can be recovered.

9
The case can be removed from the collet in the reverse direction to the assembly as described in step 4.

Tips and Warnings:

  • You do not need to striking hard.
  • You do not need to tighten hard.
  • DO NOT ATTEMPT TO UNLOAD RIMFIRE CARTRIDGES WITH THE TOOL.
  • CARTRIDGES WHICH HAVE EITHER AN EXPLOSIVE OR INCENDIARY PROJECTILE MUST NOT BE UNLOADED IN THE EZYPUL TOOL.
  • NEVER use rim fire cartridges, with this tool, doing so may cause loss of life!!!!
  • Always wear safety goggles.
  • Crazy over tightening, (especially on inferior models) may cause it to break.
Tagged as: Get Gun Powder out of a Bullet, , how to articles, how to instructions, DIY, tips, howto, learn, how do I
Article How to Get Gun Powder out of a Bullet provided by wikiHow. Content on wikiHow can be shared under a Creative Commons License.
What are your thoughts (0 Responses)

Name


Comment